This file contains all files required to print your own 80mm Ducted Fan at home.
Total Printing Volume of all 9 Files: 134,007 mm³
This file contains 9 .STL files i.e.
- 80mm Propeller – 3 Blades
- 80mm Propeller – 5 Blades
- 80mm Propeller – 6 Blades
- 80mm Propeller – 8 Blades
- 80mm Propeller – 11 Blades
- Diffuser
- Nozzle
- Shell Holder
- Stator
The 80mm ducted fan is distributed into the above-mentioned parts so that you can easily print any part at your home with your own DIY 3D printer of minimal size i.e. 220(mm)x220(mm)x250(mm)
80mm EDL with Stator Parts in File Images-
Watch our DIY Electric Ducted Fan video on youtube.
Recommended Electronics
| Motor |
Racerstar 2500 Kv Motor link DYS Sunfun 2500 Kv Motor link Samguk 2500 Kv Motor link |
| ESC |
Hobbywing 40 amp ESC link Readytosky 40 amp link BLHeli 35A/45A ESC link |
| Battery |
4S Tattu 14.8V 3300 mAh 60C link 3S Tattu 11.1V 1300 mAh 75C link |
| Servo Tester | Servo Tester link |
| Battery Charger |
Sky RC B6 Neo Charger link Imax B6 Balance Charger link Imax B3 Pro Charger (2S 3S) link |
| Wattmeter | Wattmeter RC 150A link |
Necessary Accessories
| 3D Printer | 220×220×250 mm build volume |
| Nuts and Bolts | M2.5, M3 sizes of various lengths |
| Accessories | Silicon wires, cable zip tie, heat shrink tube, soldering iron |
In case of any doubt, please use the Contact Us page.
Thank You.
3 reviews for 80mm EDF V2.0 STL
There are no reviews yet.