This file contains all files required to print your own 80mm Ducted Fan at home.
Total Printing Volume of all 3 Files: 113,267 mm³
This file contains 4 .STL files i.e.
- Motor mount for DYS Motors
- Shell
- 96mm Front Propeller – 12 Blades
- 96mm Back Propeller – 12 Blades
The DYS motor ducted fan is distributed into the above-mentioned parts so that you can easily print any part at your home with your own DIY 3D printer of minimal size i.e. 220(mm)x220(mm)x250(mm)
DYS Motor Ducted fan Single propeller – STL File Images
Watch our DYS Motor Vs Standard Motor thrust test Youtube video
Recommended Electronics
| Motor x2 | DYS 3530 1700 kv link |
| ESC x2 | Hobbywing 40 amp esc link Readytosky 40 amp link BLHeli 35A/45A ESC link |
| Battery | 4S Tattu 14.8V 3300 mAh 60C link 3S Tattu 11.1V 1300 mAh 75C link |
| Servo Tester | Servo tester link |
| Battery Charger | Sky Rc B6 Neo Charger link Imax B6 Balance Charger link Imax B3 Pro charger (2S 3S) link |
| Wattmeter | Wattmeter RC 150A link |
Necessary Accessories
| 3D Printer | 220×220×250 mm build volume |
| Nuts and Bolts | M2.5 & M3 sizes of various lengths |
| Accessories | Silicon wires, cable zip tie, heat shrink tube, soldering iron |
In case of any doubt, please use the Contact Us page.
Thank You.
Reviews
There are no reviews yet.