What You Get
STL files (all parts)
Arduino code
Mobile app (APK)
Wiring diagram
3D print settings
Everything in one ZIP file after purchase
App-Controlled Vision Robot — 3D Printed, ESP-Cam Powered, and Mecanum Driven.”
Control, stream, and navigate — all from your phone. This smart mecanum robot combines app control, onboard camera vision, and 3D-printed precision engineering
Omni Directional Movement
3D Printed
250*250*250 mm
In-App Camera View
App Controlled
Camera Pan & Tilt Movement
Fast Reflex Movement
This file contains all files required to print your own Mecanum Wheel Car with Camera on ESP32 at home.
This file contains 14 .STL files i.e.
Camera Gimbal
- Camera Case
- Camera Flap
- Fix Arm
- Gimbal Holder
- Tilt Arm
Robot Body
- Grill
- Left Body
- Right Body
- Bottom Hatch
- Button Mount
Mecanum Wheel
- Back
- Front
- Roller
- Connector
The Mecanum Wheel Car with Camera on ESP32 is distributed into the above-mentioned parts so that you can easily print any part at your home with your own DIY 3D printer of minimal size i.e. 220(mm)x220(mm)x250(mm).
In case of any doubt, please use the Contact Us page.
Thank You.
| Motor ×4 | 12V DC Gear Motor link |
| Motor Driver ×2 | L298N link |
| Microcontroller | NodeMCU (ESP8266) link |
| Servo Motor ×2 | SG90 180° link |
| Buck Converter | LM2596 link |
| ESP32 CAM | ESP32-CAM link |
| Charging Input | 12V Female DC Jack link |
| Rocker Switch | On/Off Switch link |
| Battery Management System | 3S 20A BMS link |
| Battery Charger | 12V 2A Charger link |
| Lithium-ion Cell ×3 | 18650 Rechargeable Cell link |
| 18650 Cell Case | 3-Cell Holder link |
| 3D Printer | 220×220×250 mm build volume |
| Nuts and Bolts | M2.5 & M3 sizes of various lengths |
| Accessories | Silicon wires, cable zip tie, heat shrink tube, soldering iron |
4 reviews for Mecanum Car With ESP32 STL
There are no reviews yet.