TheMechNinja

Sale!

X500 Frame

$ 10.00

  • All parts(.STL and PDF files) in one .ZIP file.
  • Easily printable on 220X220X250(mm) 3D printer.
  • Parts are easily assemblable i.e. with screws only.
  • Total printing Volume: 162,198 cubic mm.

License – TheMechNinja Paid Standard Digital File License

Categories: , , , Tags: ,
Guaranteed Safe Checkout
  • UPI ICON

X500Xcvgfgg3D Printable X500 Drone Frame .STL Files

This file contains all files required to print your own X500 drone frame at home.

Total Printing Volume of all 14 Files: 162,198 mm³

This file contains 14 .STL files i.e.

  1. 8mm Landing Gear
  2. 10mm pipe Holder
  3. 10mm Rod
  4. 14mm Arm
  5. Back PLate
  6. Bottom Plate Connector
  7. Bottom Plate
  8. Connector
  9. Landing Gear Bottom Mount
  10. Landing Gear Horizontal 10mm Pipe
  11. Landing Gear Mount
  12. Middle Plate
  13. Motor Plate
  14. Top Plate

The X500 drone frame is distributed into the above-mentioned parts so that you can easily print any part at your home with your own DIY 3D printer of minimal size i.e. 220(mm)x220(mm)x250(mm).

To make your own homemade 3D printer at home see the blog below.

Homemade 3D Printer | Simple DIY Under $150

All the files given are complete and have been tested.

The print volume of all files (approximately):-

  1. 8mm Landing Gear

    • Size – 8x113x230 (mm)
    • Volume – 5,455 mm³
  2. 10mm pipe Holder

    • Size – 10 x 25 x 19 (mm)
    • Volume – 2,928 mm³
  3. 10mm Rod

    • Size – 280 x 10 x 10 (mm)
    • Volume – 7,903 mm³
  4. 14mm Arm

    • Size – 161 x 161 x 14 (mm)
    • Volume – 8,690 mm³
  5. Back Plate

    • Size – 70 x 92 x 2 (mm)
    • Volume – 6520 mm³
  6. Bottom Plate Connector

    • Size – 10 x 84 x 44 (mm)
    • Volume – 9,958 mm³
  7. Bottom Plate

    • Size – 100 x 35 x 2 (mm)
    • Volume – 5,317 mm³
  8. Connector

    • Size – 33 x 33 x 15 (mm)
    • Volume – 4,336 mm³
  9. Landing Gear Bottom Mount

    • Size – 34 x 34 x 49 (mm)
    • Volume – 11,152 mm³
  10. Landing Gear Horizontal 10mm Pipe

    • Size – 300 x 10 x 10 (mm)
    • Volume – 8,437 mm³
  11. Landing Gear Mount

    • Size – 27 x 38 x 40 (mm)
    • Volume – 9,528 mm³
  12. Middle Plate

    • Size – 165 x 165 x 2 (mm)
    • Volume – 42,648 mm³
  13. Motor Plate

    • Size – 63 x 63 x 2 (mm)
    • Volume – 3,395 mm³
  14. Top Plate

    • Size – 165 x 165 x 2 (mm)
    • Volume – 42,451 mm³

PDF files are also attached in the ZIP folder to make the installation easier.

Reviews

There are no reviews yet.

Be the first to review “X500 Frame”
1
    Your Models
    Arduino Wifi Car With Claw Arm
    Arduino Wifi Car With Claw Arm
    1 X $ 15.00 = $ 15.00
    X500 Frame
    $ 10.00