This is Y6 Hexacopter design which is completely 3D Printable.
The best part of this design is that it has foldable arms and is easy to carry This drone has a 2-axis gimbal that can mount an ordinary Raspberry Pi camera It weights 1400 grams excluding the battery weight.
If you don’t have a 3D printer and would like a fully assembled model or a kit, send me a message and I’ll be more than happy to discuss 🙂
Watch our Y6 Hexacopter video on YouTube
| Motor ×6 |
A2212 1000KV link A2212 1400KV link |
| Propeller ×3 pair |
8038 link 8045 link 1045 link |
| ESC ×6 |
Readytosky 40A link Hobbywing Skywalker 40A link |
| Flight Controller |
Radiolink Pixhawk link CUAV Nano 7 link |
| Transmitter & Receiver | 10 Ch FS-i6S link |
| Power Distribution Board |
100A PDB link Matek PDB link |
| 3S Battery | 11.1V 8000 mAh link |
| Battery Charger |
Sky RC B6 Neo link Imax B6 Balance link Imax B3 Pro (2S 3S) link |
Note :-
OpenHD is a complex system and requires an experienced person to deal with. If you want a hassle-free and economic option, go for the above-mentioned analog FPV Transmission, or you can take the risk and work on the digital transmission OpenHD.OpenHD Air Unit
| Pi Zero | Pi Zero W link |
| Camera | 5MP Pi Camera link |
| Flex Cable | Cam Flex Cable link |
| Switch | Rocker Switch link |
| Buck Converter ×2 | LM 2596 link |
| USB Connector | Female USB link |
| SD Card | 32GB Micro SD link |
OpenHD Ground Unit
| Raspberry Pi | Pi 4 (4GB) link |
| Display | 7” Wave Share link |
| BMS | 2S 20A link |
| Buck Converter | LM 2596 link |
| Battery Cell ×2 | 18650 Rechargeable link |
| Cell Holder | 2 Cell Case link |
| Switch | Rocker Switch link |
| Antenna ×2 | AC1300 T3U Plus link |
| 3D Printer | 220×220×250 mm build volume |
| Nuts and Bolts | M2.5, M3 size of various lengths |
| Accessories | Cable zip tie, heat shrink tube, soldering iron |
1 review for Y6 Hexacopter Foldable STL
There are no reviews yet.