This file contains all files required to print your Variable Nozzle Electric Ducted Fan at home.
Total Printing Volume of all 9 Files: 115,345 mm³
This file contains 9 .STL files i.e.
- Outer Casing
- Servo Holder
- Slider
- 70mm Casing
- 70mm EDF Propeller
- EDF Holder
- Link
- New Nozzle
- Nozzle Holder
The Variable Nozzle EDF is distributed into the parts mentioned above so that you can easily print any part at your home with your own DIY 3D printer of minimal size i.e. 220(mm)x220(mm)x250(mm)
Variable Nozzle EDF Parts included in the File, Images-
Watch our DIY Variable Nozzle Electric Ducted Fan video on YouTube.
Recommended Electronics
| Motor | Racerstar 2500 Kv Motor link DYS Sunfun 2500 Kv Motor link Samguk 2500 Kv Motor link |
| ESC | Hobbywing 40 amp ESC link Readytosky 40 amp link BLHeli 35A/45A ESC link |
| Servo Motor ×3 | SG90 180 Degree link |
| Buck Converter | LM 2596 link |
| Battery | 4S Tattu 14.8V 3300 mAh 60C link 3S Tattu 11.1V 1300 mAh 75C link |
| Servo Tester | Servo Tester link |
| Battery Charger | Sky Rc B6 Neo Charger link Imax B6 Balance Charger link Imax B3 Pro Charger (2S 3S) link |
Necessary Accessories
| 3D Printer | 220×220×250 mm build volume |
| Nuts and Bolts | M2.5 & M3 sizes (various lengths) |
| Accessories | Silicon wires, cable zip tie, heat shrink tube, soldering iron |
In case of any doubt, please use the Contact Us page.
Thank You.
Reviews
There are no reviews yet.