Dual Propeller
3D Printer Required
220*220*250 mm
Full-throttle propeller test
Powerful Jet Blow
<
This file contains all files required to print your own Ducted Fan at home.
Total Printing Volume of all 6 Files: 126,734 mm³
This file contains 6 .STL files i.e.
- Back Blade
- Front Blade
- Diffuser
- Nozzle
- Outer Shell
- Second Shell
The ducted fan is distributed into the above-mentioned parts so that you can easily print any part at your home with your own DIY 3D printer of minimal size i.e. 220(mm)x220(mm)x250(mm).
All the files given are complete and have been tested.
For assembly and further instruction, you can visit the link given below
Electric Ducted Fan: The Best Step Wise Guide
OR
Watch our DIY Electric Ducted Fan video on youtube.
Parts Included in the STL File
| Motor ×2 |
A2212 1000 kv link A2212 1400 kv link |
| ESC ×2 |
Hobbywing 40 amp ESC link Readytosky 40 amp link BLHeli 35A/45A ESC link |
| Battery |
4S Tattu 14.8V 3300 mAh 60C link 3S Tattu 11.1V 1300 mAh 75C link |
| Servo Tester | Servo Tester link |
| Battery Charger |
Sky RC B6 Neo Charger link Imax B6 Balance Charger link Imax B3 Pro Charger (2S 3S) link |
| Wattmeter | Wattmeter RC 150A link |
| 3D Printer | 220×220×250 mm build volume |
| Nuts and Bolts |
M2.5 M3 sizes of various lengths |
| Accessories |
Silicon wires Cable zip tie Heat shrink tube Soldering iron |
3 reviews for 100mm Ducted Fan Dual Propeller STL
There are no reviews yet.