3D Printable Motor Thrust Test Rig

This “Motor Thrust Test Rig” is a downloadable product that contains a ZIP file containing all the STL files for 3D printing your test rig at home.The ZIP folder contains 6 STL files that all are tested and printed. Details about all of them are given further in the description below.The name of all the 6 STL files included in the ZIP folder is-

1. Center Rod Holder
2. Motor Mount
3. Pulley Holder
4. Thrust Tester Stand
5. Vertical Stand 1
6. Vertical Stand 2

The total Print volume of all 6 STL files is 179,517 mm³, image and further details of each Motor Test Rig STL file are given below.All the above files are easily printable on a 220 x 220 x 220 (mm) homemade 3D printer. If you don’t have one then you can watch our step-wise detailed guide for the same, whose link is given below.

Homemade 3D Printer | Simple DIY Under $150

Print Volume and Dimensions of each Motor Test Rig STL File

1. Center Rod Holder

• Print Volume – 51,118 mm³
• Dimensions (mm) – 30 x 80 x 40

2. Motor Mount

• Print Volume – 22,174 mm³
• Dimensions (mm) – 30 x 70 x 30

3. Pulley Holder

• Print Volume – 3,584 mm³
• Dimensions (mm) – 18 x 20 x 25

4. Thrust Tester Stand

• Print Volume – 21,074 mm³
• Dimensions (mm) – 40 x 40 x 25

5. Vertical Stand 1

• Print Volume – 40,817 mm³
• Dimensions (mm) – 30 x 40 x 65

6. Vertical Stand 2

• Print Volume – 40,750 mm³
• Dimensions (mm) – 30 x 40 x 65

You can also read our blog onthe motor thrust test rig, performed on Racerstar 2207 Motor.(Coming Soon)Or, you can watch our Youtube video.

Motor ×4	5010 750 KV Brushless motor link
Propeller ×2 pair	1145 link 1147 link 1150 link 1238 link 1245 link
ESC ×4	Hobbywing 60A link Hobbywing 40A link Readytosky 40A link
Flight Controller	Radiolink Pixhawk link CUAV 7 Nano link
Transmitter & Receiver	10 Ch FS-i6S link
Power Distribution Board	100A PDB link Matek PDB link
6S Battery	5000 mAh link
Battery Charger	Sky RC B6 Neo link Imax B6 Balance link Imax B3 Pro (2S 3S) link