3D Printable Motor Thrust Test Rig

This “Motor Thrust Test Rig” is a downloadable product that contains a ZIP file containing all the STL files for 3D printing your test rig at home.

The ZIP folder contains 6 STL files that all are tested and printed. Details about all of them are given further in the description below.

The name of all the 6 STL files included in the ZIP folder is-

1. Center Rod Holder
2. Motor Mount
3. Pulley Holder
4. Thrust Tester Stand
5. Vertical Stand 1
6. Vertical Stand 2

The total Print volume of all 6 STL files is 179,517 mm³, image and further details of each Motor Test Rig STL file are given below.

All the above files are easily printable on a 220 x 220 x 220 (mm) homemade 3D printer. If you don’t have one then you can watch our step-wise detailed guide for the same, whose link is given below.

Homemade 3D Printer | Simple DIY Under $150

 

Print Volume and Dimensions of each Motor Test Rig STL File

1. Center Rod Holder

• Print Volume – 51,118 mm³
• Dimensions (mm) – 30 x 80 x 40

2. Motor Mount

• Print Volume – 22,174 mm³
• Dimensions (mm) – 30 x 70 x 30

3. Pulley Holder

• Print Volume – 3,584 mm³
• Dimensions (mm) – 18 x 20 x 25

4. Thrust Tester Stand

• Print Volume – 21,074 mm³
• Dimensions (mm) – 40 x 40 x 25

5. Vertical Stand 1

• Print Volume – 40,817 mm³
• Dimensions (mm) – 30 x 40 x 65

6. Vertical Stand 2

• Print Volume – 40,750 mm³
• Dimensions (mm) – 30 x 40 x 65

You can also read our blog on the motor thrust test rig, performed on Racerstar 2207 Motor.

(Coming Soon)

Or, you can watch our Youtube video.